NHÀ PHÂN PHỐI ĐỘC QUYỀN

GREENTECH là nhà phân phối ĐỘC QUYỀN của MÀNG LỌC SINH HỌC MITSUBISHI –  NHẬT BẢN tại Việt Nam

GIỚI THIỆU greentech vn

Công ty CỔ PHẦN MÔI TRƯỜNG CÔNG NGHỆ XANH là một trong những công ty môi trường hàng đầu tại Việt Nam, đặc biệt trong lĩnh vực xử lý nước thải bằng công nghệ màng lọc sinh học (MBR). Công ty chúng tôi đã và đang tư vấn nhằm cung cấp cho các nhà đầu tư những phương án xử lý môi truờng hiệu quả về kinh tế nhất, thẩm mỹ và bền vững lâu dài.

Hiện tại chúng tôi thực hiện hàng trăm dự án phục vụ cộng đồng, các tổ chức, doanh nghiệp trong và ngoài nước

Với phương châm “Nâng cao chất lượng cuộc sống“, Công ty chúng tôi sẵn sàng kề vai sát cánh cùng bạn trong việc giải quyết các vấn đề môi trường, mang đến cho bạn niền tin về sự an toàn

GIỚI THIỆU

SẢN PHẨM CHÚNG TÔI CUNG CẤP

15-5 PH Stainless Steel Hex Bar Mill Annealed Temper Finish Annealed Precision Tolerance Unpolished AMS 2300/ASTM A564/ASTM A484 1 Across Flats 48 Length

15-5 PH Stainless Steel Hex Bar, Unpolished (Mill) Finish, Annealed, 0 (Annealed) Temper, Precision Tolerance, AMS 2300/ASTM A564/ASTM A484 1' Across Flats, 48' Length: Industrial & Scientific. 15-5 PH Stainless Steel Hex Bar, Unpolished (Mill) Finish, Annealed, 0 (Annealed) Temper, Precision Tolerance, AMS 2300/ASTM A564/ASTM A484 1" Across Flats, 48" Length: Industrial & Scientific. 15-5 PH stainless steel is a strong, tough material that can be heat treated at low temperatures after machining for high strength and hardness, and is more forgeable than 17-4 PH 。 Unpolished (mill) surface has no finish 。 Meets AMS 2300, ASTM A564, and ASTM A484 specifications 。 Annealed after shaping to modify the metal's properties 。 Precision tolerance 。 The 5-5 PH stainless steel hex bar has an unpolished (mill) surface, has been annealed, meets SAE Aerospace Material Specifications AMS 200 and American Society for Testing and Materials International ASTM A564 and A484 specifications, and has a precision tolerance. The 5-5 PH stainless steel grade is a strong, tough material that can be heat treated at low temperatures after machining for high strength and hardness. It offers better forgeability (ability to be shaped by pressure or impact) than 7-4 PH and more corrosion resistance than 40 and 40 stainless steel. This material can be heat treated in lower temperatures than other heat-treatable stainless steels, reducing the likelihood of the material warping and scaling. A precipitation-hardening stainless steel, 5-5 PH is magnetic in its hardened state. The material has been annealed, a method of heating and cooling metal to modify its properties, such as increasing its formability and toughness or decreasing its strength, after it has been shaped.。Stainless steel is an iron alloy with resistance to staining and rusting in many environments where steel would typically degrade. The chemical composition of each grade creates a grain structure that falls into one of five classes: austenitic, duplex, ferritic, martensitic, and precipitation hardening. The austenitic class contains the most formable, weldable, and corrosion-resistant stainless steel grades, but they cannot be heat treated. The duplex class offers high resistance to pitting and chloride stress corrosion cracking. Duplex grades are heat treatable and roughly twice as strong as austenitic grades. The ferritic class contains moderately formable and corrosion-resistant grades compared to other stainless steel classes, but they cannot be heat treated. The martensitic class includes some of the hardest and strongest stainless steel grades that also offer mild corrosion resistance, high hardness, and good formability. Martensitic grades can be heat treated. The precipitation-hardening (PH) class can be heat treated after fabrication to achieve some of the highest hardness ratings in stainless steel.。 Tensile strength, used to indicate the material’s overall strength, is the peak stress it can withstand before it breaks. Corrosion resistance describes the material's ability to prevent deterioration caused by atmosphere, moisture, or other medium. Wear resistance indicates the ability to prevent surface damage caused by contact with other surfaces. Toughness describes the material's ability to absorb energy before breaking, while hardness (commonly measured as indentation hardness) describes its resistance to permanent surface deformation. Formability indicates how easily the material can be permanently shaped. Machinability describes how easily it can be cut, shaped, finished, or otherwise machined, while weldability characterizes the ability to be welded. Magnetism characterizes how much the material is repelled by or attracted to a magnet.。 。 。 。

15-5 PH Stainless Steel Hex Bar Mill Annealed Temper Finish Annealed Precision Tolerance Unpolished AMS 2300//ASTM A564//ASTM A484 1 Across Flats 48 Length